What are the methods to isolate titanium screws from moisture contact?

It is very common for metals to rust, even metal products like stainless steel that are difficult to rust may rust under certain conditions. If they rust, there will inevitably be wear and tear, which is something that no one wants to see.

Titanium screw manufacturers have also conducted in-depth research on this, as titanium screws are much more expensive and valuable than ordinary screws. In fact, the most important way to reduce the possibility of rusting is to reduce the contact between metal, air, and moisture.

Let's follow the editor from the titanium screw manufacturer to learn about how titanium screws isolate moisture.

What are the methods to isolate titanium screws from moisture contact?

First point: The selection of component insulation impregnating paint, such as epoxy resin or polyurethane impregnating paint, should not contain volatile acids, and solvent-free paint should be used for vibration machinery.

Secondly, the use of melamine alkyd paint should adjust the curing temperature and curing time. A curing temperature slightly higher than 130 ℃ (such as 135 ℃) and a curing time greater than 180 minutes are appropriate, and the process needs to be strictly followed, especially in hot and humid seasons. From the perspective of the concept of rust, the conventional drying (curing) time of sample paint factories may not be rich, as cars have a specific internal shape.

Thirdly, surface corrosion treatment of stainless steel screws refers to the use of various methods to maintain the surface of the metal layer. Its function is to isolate the metal from the corrosive environment, suppress the corrosion process, or reduce the contact between corrosive media and the metal surface, in order to prevent or slow down corrosion.